STM UTV Polaris RZR XP-1000 Supertip P-Series Cam Arms

Description:

Available in 45 gram base weight with the ability of adding 20 grams per arm for adjustment. This design allows the option of adding weight to two different areas on one side of the cam arm to create the shifting characteristics you desire. Each arm can be assembled with tungsten and steel washers used in various combinations to achieve the desired operating RPM.

For use with Rage 3P a .075 spider shim part# 1001212 is required. A 3P clutch cover is also required 3P clutch cover part# 3001032

These are bushing style cam arms non-fixed pin. Comes with bushings installed with size option selected from above. Use 1/4" bushings for stock Polaris primary clutch.

These SUPERTIP Cam Arms are not recommended at RPM ranges above 9000 RPM

Our fastener kit comes with the following hardware:

Quantity supplied per arm: 

• 2   - tungsten inserts - 7 grams

• 18 - washers - 1 gram 

• 4   - O-rings  

• 12 - M3 x 6 long screws  

• 2   - set screws  

Supplied per kit: 

• 1 - 222 Loctite® - 1ml 

• 1 - T-10 Torx driver