STM ATV/UTV Rage 3P Short Post Can-Am Primary Clutch
Short Post STM Rage 3P (Low End Torque and Engagement) Primary Can-Am Works with STM Short Post Secondary Only
Description:
The Rage 3P is an STM primary designed with the STM short post that works only with the STM short post-secondary. STM Tuner drove Can-Am short post. This Rage Primary will not work with the stock Secondary clutch
This clutch offers extremely smooth low engagement with improved torque.
New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial take off ratio than our past design. Allows tighter belt deflection and smoother transmission shifting.
An affordable replacement for the stock primary clutch. Complete billet design that outperforms the existing primary. Using our adjustable Supertip Cam arms with the Rage 3 is the perfect recipe for your stock or modified Can-Am. These STM clutches will fit under the stock cover with no interference. The Rage 3 is capable of using most cam arms that are available on the market. We incorporate a fixed pin design that pivots the cam arm between two bushings and attaches the cam arm to the pin providing more durability to the cam arm pivot points. All parts are replaceable and stocked.
The cover is designed to use Polaris ATV springs providing a wide variety of spring rates to choose from.
The rage 3 comes calibrated with a spring and set of our own adjustable supertip cam arms.
Includes a new bolt for installation.
Each clutch is assembled and set up to run the brp OEM belt
item numbers 1001070 primary clutch holding tool, 1001072 STM & Arctic cat spider nut socket tool for 1995-2009 and either 1001020 STM rage 3 & 6 spider tool, or 1001032 STM rage 4 & 8 spider tool (depending on rage number) is required when removing or installing the spider. Works on all STM primary clutches. Sold separately.
For fitment, please check with us before placing an order!