Iron Baltic Riding Arena Leveler / Groomer

Description

The riding arena plow is intended for leveling and hoeing riding areas. The plow has spring spikes with an adjustable working height for surface hoeing. Adjusting the working angle of the side and rear plow blades allows for the surface at the edges of the riding arena to be shifted back to the middle. There are rubber edges and an adjustable perimeter wheel to protect the walls of a riding arena. The finishing roller compacts the soil, giving it a lovely, polished look.

The riding arena leveller can be towed by all vehicles equipped with a 50 mm/2” ball hitch unit and with a towing eyelet (22. 050S) installed as an optional accessory. The trailer can be also towed by hitching it to other vehicles equipped with a coupling device.

Setting the transportation position and operating depth is done with a manual lifting mechanism or a 12V electrohydraulic cylinder installed as an accessory.

The riding arena plow & drag / groomer is for leveling and hoeing riding areas.

The plow has spring spikes / tines with an adjustable working height for surface hoeing.

Adjusting the working angle of the side- and rear plow blades allows for the surface at the edges of the riding arena to be shifted back to the middle.

There are rubber edges and an adjustable perimeter wheel to protect the walls of a riding arena.

The finishing roller compacts the soil, giving it a lovely, polished look.

The riding arena leveler can be towed by all vehicles equipped with a 50 mm/2” ball hitch unit and with a towing eyelet (22. 050S) installed as an optional accessory. The trailer can also be towed by hitching it to other vehicles equipped with a coupling device.

Setting the transportation position and operating depth is done with a manual lifting mechanism or a 12V electrohydraulic cylinder installed as an optional accessory.

Notes For Towing Eye:

360 degree swivel hitch towing eye for 50x50mm tow bars.

Replaces the ball type hitch and allows tow behind equipment used with pin type hitch receivers commonly used with snowmobiles, lawn / garden tractors etc.

Eyelet pin hole diameter (max pin diameter) is 22mm.

• Possible to use it with the following IronBaltic equipment:

• 40.0000 Trailer ECO 300

• 43.0000 Bale trailer

• 52.5000 Sand & Gravel spreader G2 PRO 500

• 61.1000 Trailer Basic 500

This product is included by default with Iron Baltic ski track maker kits p/n 47.0000 & 47.2000 and with the cargo sled 22.000

Notes For Electro-hydraulic cylinder KYB:

An electric over hydraulic linear actuator featuring an electric DC motor integrated with hydraulic valves, pump and cylinder in a compact package which fits for different kind of ATV / UTV implements for desired motion or switching in between working and transportation positions. One actuator fits different implements and can be moved from one to another easily. Electric power required (12V DC) can be supplied from the power source of the ATV / UTV.

Manufacturer part number: MMP4 - B1B250BB - DHR

Wiring harness & switch kit, part number 70.2500 required for installation.

Notes for Cable kit (1-cylinder control)

Wiring harness & switch kit is required to connect and power up one electric cylinder( p/n 70.500 or 70.1000 ) with the 12V DC from the battery of the ATV/UTV.

The kit consist of wiring harness (with 35A fuse), switch (for 1 cylinder), mounting hardware and installation manual.

Length of the wiring harness is 6000mm - 3000mm in between switch and battery connectors and 3000mm in between switch and the cylinder.

Features:

• Strong steel structure. Galvanized or powder coat finish

• Hitch coupler for 50 mm towball.

• Adjustable height of the plow.

• Adjustable angle of the plows.

• Adjustable perimeter wheel.

• Adjustable working height spring spikes (tines) for surface hoeing

• The finishing roller compacts the soil, giving it a lovely, polished look.