Can-am Defender High Clearance 2" Forward Offset UTV A-Arms
Features
-
Adds 2” of forwarding offset
-
Allows room for bigger tires
-
Kit 1: 32” max
-
Kit 2: 34” max
-
Kit 3: 31” max
-
1.25” tubing is 25% larger than stock
-
Adjustable lower pivot block for full camber adjustability
-
Utilizes stock A-arm bushings
-
UV-resistant powder coat finish
-
Easy to install
-
Backed by a lifetime warranty
Details
More Stability and Better Rides
Your Defender is rugged and it’s built for the off-road. If you want it to truly handle everything you encounter, you need to upgrade to SuperATV’s High-Clearance 2” Forward Offset A-Arms for the Can-Am Defender. They’re stronger, come with full camber adjustment, and increase your wheelbase by 2 inches for more stability and room for bigger tires. It’s a win-win.
Bigger Tires and Better Clearance
The 2” forward offset gives you better tire clearance, all without a lift! A longer wheelbase also makes you more stable over hills and large obstacles. They make use of our unique dual-bend design to raise the profile of these arms so they won’t get hung up on rocks and other trail obstacles.
Superb Strength
Ours beefed-up 1.25” diameter tubing is 25% larger than stock and results in much stronger control arms. Ride hard and get wild. We want you to test the limits and ride with confidence. With the strongest suspension you can get, nothing will stop you.
Plus, they’re backed by a lifetime warranty.
Adjustable Pivot Blocks
You get full adjustability thanks to our adjustable pivot blocks. They come set to stock specifications right out of the box, so you don’t have to mess with them if you don’t want to. But they let you tweak your camber to perfection if you bog down your suspension with a bunch of cab weight or add a small camber-crippling lift. You can dial it in so you don’t get any premature tire wear but you do get a better ride.
Need Help Choosing Your Ball Joints?
We have Heavy Duty and Super Duty ball joints for you to choose from. Whichever one you get, we’ll install them for you. Here’s the rundown:
Heavy Duty—These use a Chromoly stud and housing with a thicker stud at the base than OEM. With about 2X stock strength, it’s great for most riders. They have adjustable stud tension and are easily rebuildable.
Super Duty—These use a 300M stud with a Chromoly housing and the stud is thicker at the base than OEM. With about 2.25X stock strength, it’s the ultimate ball joint for hardcore riders. The perfect ball joints for high-end A-arms like these. They also have adjustable stud tension and are easily rebuildable.
Order your arms with ball joints and they come preinstalled. That means you’ll spend less time in the garage, and more time riding even harder.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm