Quadivator UTV Landscape Rake

Description

A landscape rakes for tillage and planning the surface. Suitable for planning driveways and parking lots, the maintenance riding grounds and animal shelters, and for raking off the larger stones off the field. The working depth and transporting position are adjusted with a manual lifting mechanism (fitted by default) or a 12V electrical cylinder installed as an optional accessory. Suitable to use with UTV / side-by-side vehicles and larger ATV-s, small tractors or other vehicles equipped with a 50mm hitch ball.

Suitable to use with the UTV / side by side
machines or also with the bigger / heavier ATV-s.

Notes For Electro-hydraulic cylinder KYB:

An electric over hydraulic linear actuator featuring an electric DC motor integrated with hydraulic valves, pump, and cylinder in a compact package that fits different kinds of ATV / UTV implements for desired motion or switching in between working and transportation positions. One actuator fits different implements and can be moved from one to another easily. Electric power required (12V DC) can be supplied from the power source of the ATV / UTV.

Manufacturer part number: MMP4 - B1B250BB - DHR

Wiring harness & switch kit, part number 70.2500 required for installation.

Notes For Cable Kit (1-Cylinder Control):

A wiring harness & switch kit is required to connect and power up one electric cylinder( p/n 70.500 or 70.1000 ) with the 12V DC from the battery of the ATV/UTV.

The kit consists of a wiring harness (with 35A fuse), switch (for 1 cylinder), mounting hardware, and installation manual.

The length of the wiring harness is 6000mm - 3000mm in between the switch and battery connectors and 3000mm in between the switch and the cylinder.

Features:

• Working width 1800mm

• Tine height 380mm

• Heat-treated steel spring tines 380mm high (36pcs)

• 5 pivoting positions to adjust the working angle (-30 / -15 / 0 / 15 / 30)

• Rear-mounted wheels have pinned axles allowing 4 different mounting positions on both sides, allowing to adjust of the rake offset / diagonally to the ground
  
  Spring steel heat-treated tines.

• Rear-mounted wheels have pinned axles allowing 4 different mounting positions on each side allowing you to raise either side with respect to the other.

• Excellent for leveling driveways and parking lots. Rake the larger undesirable rocks off the driveway or parking lot.

• Excellent for landscaping residential or commercial lots. Create berms or ditches effectively and easily.

• Optional 12 Volt Mini Motion (70.1000) or Hydraulic package (71.0000) lifts and lowers the plow without you leaving the seat.

• Manual lift kit (14.10400) included (only for products supplied by Iron Baltic ).